Support Home Legacy Tools Walkthrough: Embedded Data

Embedded Data

  • What is embedded data?
  • Storing Embedded Data
  • Showing Participants their Responses and Scores
  • Using Embedded Data in Branch Nodes
  • Using Embedded Data in the Task Script Tab
  • Advanced Scoring
  • Questionnaire Branching Worked Examples
  • 1. Accepting/Rejecting Participants According To The Age Criteria
  • 2. Accepting/Rejecting Participants Based on Specific Criteria (multiple choice)
  • Videos
  • Embedded Data: Showing Participants their Scores
  • Embedded Data: Showing Participants their Response
  • Embedded Data: Branching from a Questionnaire
  • Embedded Data: Manipulations
Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

What is embedded data?


Embedded data is data about a participant's responses that you can store at one point in the experiment and access later on. Essentially, embedded data is information you can ’carry’ from one part of your task or questionnaire to others within the same experiment.

It can be used to:

Note: Embedded data does not appear in your downloadable metrics.


Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Storing Embedded Data


In the Questionnaire Builder

To store embedded data in the Questionnaire Builder, check the ‘Write to Embedded data’ option in the widget of your choice.

Note: This is not available for all widgets.

Image showing QB widget Key and Embedded Data response box

This will save the responses from this widget as embedded data, allowing you to retrieve it later in the experiment.

To Branch participants according to their answers, you would then need to configure a Branch Node in the Experiment Tree.


In the Task Builder

To store embedded data in the Task Builder, go to the Embedded data settings within the 'Active Responses' menu below the Screen Preview.

Note: This is not available for all zones.

Identify which of the options you'd like to store as embedded data, and enter in the setting a name for the embedded data e.g. 'correct'.

Image of Static Embedded Data settings

This will save the selected data under the name you have entered, allowing you to retrieve it later in the experiment.

In the example above, the embedded data are saved as Static content (orange), meaning correct and total counts will accumulate across all trials and all versions of the task. You can also save embedded data as Spreadsheet content (green), if you want to count correct/total separately for different groups of trials, or as Manipulation content (blue), if you want to count correct/total separately for different versions of a task. For more on the different ways of storing and retrieving embedded data in the Task Builder, see the videos later in this guide.

Note:

  • ‘Total answer count’ also includes timed out responses.
  • ‘Incorrect answer count’ also includes data for which no correct answer has been set.
  • ‘Correct answer count’ requires you to set a correct answer.
  • ‘Store most recent answer as embedded data called (setting)’ is useful for branching at the experiment level based on a single response. We have an example Experiment which showcases embedded data.

‘Store correct answer count’, ‘Store incorrect answer count’, ‘Store total answer count’ and ‘Store percentage correct answers’ require you to set a correct answer for each trial.

Pro Tip

Remember: All names are case-sensitive

In the Questionnaire Builder, the embedded data can be accessed by using the key that was set for the response widget of interest. In the Task Builder, the embedded data can be accessed by using the name you entered in the embedded data settings.

When choosing a key or name, try to make it something unique and memorable.

A good way to make sure you are using the same word is to copy and paste the key from your questionnnaire, or the name from the embedded data settings on your task screen, straight into the field where you are using it later.

Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Showing Participants their Responses and Scores


In the Questionnaire Builder

To present participants with one of their previous responses, add a Rich Text widget to your questionnaire. In this widget, type $${questionKey}.

The answer will then appear in this space.

This can also be used to retrieve an answer from a task or another questionnaire; just add in the correct embedded data key/name.

Image showing Rich Text widget with score code

In the Task Builder

You can show participants their results by creating a Rich Text Zone.

In this zone, enter the following: $${embeddedDataName}.

The embedded data value will then be displayed in this space.

Screenshot of the Rich Text Zone with embedded data syntax.

This can also be used to retrieve a response from a questionnaire or another task -- just add in the correct embedded data key/name.

We have created an Example Task that uses embedded data to display correct out of total trials.

We have an Example Task that uses embedded data in conjunction with the spreadsheet to display correct out of total trials, separated by rounds.

We have an Example Task that uses embedded data in conjunction with the spreadsheet to display correct hits and false alarms.

Watch this video guide to see how to set up embedded data to show participants their scores for two separate categories of trials within the same task.

Watch this video guide to see how to set up embedded data to show participants their most recent response on a feedback screen after each trial.

Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Using Embedded Data in Branch Nodes


Branch Nodes allow you to send participants down different experiment paths based on their Questionnaire answers or Task responses.

After you have stored your answer or score as embedded data, you need to add a Branch Node.

For your Branch Node to work correctly, it needs to know what data to search for, and who to send down each branch.

You will always need to set up a minimum of two branches, one of which is set to a specific response or range of values, and a default. The two branches, when combined, will then represent the full range of responses your participants can give, so that no participant becomes stuck at the Branch Node.

To set up your Branch Node, click on the Node.

A screenshot of the configuration setting sin the Branch Node.

Group is the label you give to your branch.

Property - This is your question 'Key', or the name you gave your embedded data within the Task Builder. This tells the Branch Node what question the branch refers to.

Rule and Value are the rules you set for the branch. 'Value' can be numeric, such as the number of correct responses, or the name of one of your response options.

Press the small plus button at the bottom of the screen to add in another branch.

Your default branch can be configured by inputting the Group and Property and checking the Default option box.

Once your branches have been set up, your Branch Node will be able to link to one node per branch, e.g. if two branches are configured, you can create two different task paths.

A screenshot of the experiment tree with a branch Node.

A common reason to use embedded data with a branch node is in order to reject participants who do not meet your experiment requirements. This could be because they don't fit into your target group based on your exclusion criteria, because they gave an incorrect response to an attention check, or, as in the example below, simply because they did not agree to your consent form.

A screenshot of the experiment tree with a reject Node.

We have created a Tutorial of two experiments that use embedded data in the Questionnaire Builder in conjunction with the Branch Node to screen participants based on questionnaire answers. You can also watch our Video guide showing how to set up the first of these experiments.

We have created a Demo experiment that uses embedded data in the Task Builder in conjunction with the Branch Node to reject participants who fail a manipulation check.

We have created an example experiment that uses embedded data in conjunction with the Branch Node to send participants down different paths based on their response to one critical trial in a Task.

We have created an example experiment that uses embedded data in conjunction with the Branch Node and the Early Exit button to send participants to easy, medium or hard versions of a task, depending on how far they got in a screening version of the task.


Using Embedded Data from Repeated Versions of the Same Task

In experiments where the same participant does the same task more than once, using embedded data becomes a little more complicated.

Imagine we give participants a task. Participants who get over 70% should be sent to a longer version of the same task and participants who get under 70% to a shorter version.

In the experiment tree below, the participant does the Thatcher task. The participant's percentage correct is saved as static embedded data under the name 'percentage'. Based on this data, the participant should then be sent either to a longer (left branch) or a shorter (right branch) version of the same task. The right-branch participants should then be directed to a 'Congratulations' screen if they got over 70% on their second try, or 'Better luck next time' if they got under 70%.

A screenshot of an exmaperiment tree where participants are branched based on percentage of correct answers.

You may have noticed a problem here. If the embedded data name is set as static, it will have the same name ('percentage') across all versions of the task in the Experiment Tree. This means the percentage correct will accumulate, instead of being reset when the participant starts the second iteration of the task. This could lead to incorrect branching.

You can avoid this by setting your embedded data keys/names as manipulations.

A screenshot of the percentage correct embedded data saved as a manipulations.

This will allow you to set a unique embedded data name for each version of the task. You can set these up by clicking each individual task node in the Experiment Tree.

A screenshot of the task node in the experiment tree where manipulations are configured. A screenshot of the experiment tree where the embedded data are saved as manipulations.

We have created the example experiment shown in the images above, which uses performance branching to send participants to easier or harder versions of the same task based on their initial scores. You can also view a version where the embedded data have not been set up correctly . Try cloning this version and see if you can fix the problem!

Watch this video guide to see another example of how to set up embedded data in conjunction with Task Manipulations.

We have created an example experiment that uses embedded data in conjunction with Task Manipulations and Branch Nodes to direct participants to a harder version of a task if they score over 70%.


NOTE: Using Manipulations will only work if the different iterations of the task are represented by separate nodes in the Experiment Tree. If the participant is instead sent back to the same node repeatedly, for example when using the Repeat Node, then you will need to use scripting to reset the embedded data for each repeat. We have created an example script that resets embedded data for you to use in our own tasks.

We have created an example experiment that uses scripting in conjunction with the Branch Node and the Repeat Node to make participants repeat a task if they did not reach a given score criterion.

You can find out more about the Branch Node configuration settings in the Experiment Tree Tooling Reference Guide.


Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Using Embedded Data in the Task Script Tab


You can also use embedded data in the Script Tab. In order to do so, you'll need to use two paired functions: gorilla.store, for storing embedded data, and gorilla.retrieve, for accessing embedded data for later use.

A screenshot of the Script tab in Task Builder 1.

Note that by default, embedded data is not included in your downloadable metrics at the end of the experiment. This default behaviour can be changed using scripting. Here's an example script which adds your embedded data to your metrics: Save Embedded Data to Metrics task example .

Once your embedded data is in your metrics, you can use this to add custom functionality to your task. You may want to use advanced scoring, or use embedded data to manipulate task flow.

Pro Tip

We have created an example task that uses gorilla.store and gorilla.retrieve to access and update the participant's current total score and display it on screen.

Check out a Gorilla Academy case study that implements this functionality in the context of a real experiment.

Take a look at our Task Builder Script Examples for other ideas, or adapt one for your own use.


Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Advanced Scoring


In the Questionnaire Builder

You can use embedded data within the questionnaire builder to combine answers into scores, reverse score, and separate participants into high, medium or low groups. This is achieved by entering some javascript into the script widget.

A screenshot of the script widget in questionnaire builder 1.

Combining answers requires several stages. This example uses Likert scale questions.

  1. First, after checking the embedded data box, you need to ‘retrieve’ the embedded data so that the script widget can use the embedded data. Input the code:

    var response1normal = parseInt(gorilla.retrieve('response1', 4, true)); var response2reverse = 8 - parseInt(gorilla.retrieve('response2', 4, true)); This retrieves the embedded data ‘response1’ (question key for response 1) and ‘response2’ (question key for response 2).

    It makes the default value (if no response is given) 4, makes sure the answer is an integer, and names this transformed data ‘response1normal’ and ‘response2reverse’ respectively.

  2. Then you need to combine the scores. You can do this by averaging the scores for the variables response1normal and response2reverse, and naming this as a 3rd variable, score.

    var score = (response1normal + response2reverse) / 2;

  3. The next job is to store this new variable within embedded data so that we can branch participants according to it.

    gorilla.store('score', score, true); ‘score’ will now be the key we can enter into our branch node, just as you would with a question key.

  4. The last step is to store this data to metrics.

    gorilla.metric({ question_key: 'score', response: score, })

This data will now be uploaded under the column labelled response.

For further detail on how to use the script widget with embedded data, and how to separate participants into groups, see the Scripting in the Questionnaire Builder walkthrough.

Information on using embedded data within the questionnaire builder is also available in previous pages of this guide.


In the Task Builder

You can score in the Task Builder in a similar way, through the script tab instead of the script widget. Gorilla will automatically count the number of correct and incorrect answers for you if you set a correct answer and use the embedded data settings.

Check out 'Using Embedded Data in the Task Script Tab' to see how to retrieve embedded data for use in the Script Tab. Remember to retrieve the embedded data at the right point - if you want to use specific text answers rather than just a percentage or count, you'll need to run a script at the end of every trial using gorilla.onScreenFinish. We have created an example task that uses this function to display all of a participant's answers on the end screen of a task.

After you've retrieved your embedded data, you can use steps 2, 3, and 4, in the Questionnaire Builder example above to add your custom scoring. If your scoring is more complicated, requiring if and else statements, please take a look at our Task Builder Script Examples.


Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Accepting/Rejecting Participants According To The Age Criteria


In this example we have a single question in a questionnaire which asks participants their age. If their age is below 18 they are rejected from the experiment. This example can be easily adapted to create a custom consent form by having only two radio buttons, 'consent' and 'do not consent'.

  1. Set up the question in the questionnaire. We have chosen to use radio buttons which divide the ages into groups.
  2. Choose a key to refer to the response later and check the embedded data option
A screenshot of an age question in QB1 where the response is saved to embedded data.
  1. In the experiment tree add a branch node after the questionnaire
  2. Create 2 groups, a reject group and an accept group. For the reject group enter the key as the property and create an appropriate rule. In this example it is if the value is equal to 'less than 18'. You do not need to enter any rule for the accept group as any other response will lead down this branch. You must set it to default.
A screenshot of the branch node configuration settings set to branch base don age.
  1. Create a reject node and link the reject branch to this node. The accept branch will lead to the rest of the experiment.
A screenshot of the experiment tree where participants are branched based on age. ---
Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Accepting/Rejecting Participants Based on Specific Criteria (multiple choice)


In this example we have a series of questions in a questionnaire which ask participants whether they suffer from the given diagnoses. If they answer yes to any of the diagnoses they are rejected from the experiment.

  1. Set up the question in the questionnaire. We have chosen to use checklist buttons for each of the diagnoses but in your questionnaire the responses need not be the same widget.

  2. Choose keys to refer to the responses later and check the embedded data option. For a checklist the keys are automatically numbered.

A screenshot of a multiple choice question in QB1 where the response is saved to embedded data.
  1. In the experiment tree add a branch node after the questionnaire.

  2. Create as many groups as you have questions as well as an accept group. For the reject groups enter the question key as the property and create an appropriate rule. In this example if the box is checked we want to reject the participant so the rule is if the value is equal to the name of the checkbox. You do not need to enter any rule for the accept group as if none of the reject rules are satisfied the participant will go down this branch. You must set it to default.

A screenshot of the branch node configuration based on a multiple choice question.
  1. Create a reject node and link all of the reject branches to this node. The accept branch will lead to the rest of the experiment.
A screenshot of the experiment tree where the branch nodes have been configured following a multiple choice question.
Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Embedded Data: Showing Participants their Scores


This video shows you how to use embedded data settings to show participants their scores for two separate categories of trials within a task.

Length (mins): 4:27


Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Embedded Data: Showing Participants their Response


This video shows you how to use embedded data settings to show participants their most recent response on a feedback screen after each trial.

Length (mins): 6:03


Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Embedded Data: Branching from a Questionnaire


This video shows you how to use embedded data in conjunction with a Branch Node to send participants down different paths in your experiment based on an answer in a Questionnaire.

Length (mins): 6:50


Warning

You're viewing the support pages for our Legacy Tooling and, as such, the information may be outdated. Now is a great time to check out our new and improved tooling, and make the move to Questionnaire Builder 2 and Task Builder 2! Our updated onboarding workshop (live or on-demand) is a good place to start.

Embedded Data: Manipulations


This video shows you how to use embedded data in conjunction with Task Manipulations to reset participants' scores when they repeat different versions of the same task.

Length (mins): 6:50